Thermo Fisher automates electron microscopy sample prep from full semiconductor wafers

Thermo Fisher Scientific has completed multiple installations of its Optis focused ion beam-scanning electron microscope (FIB-SEM). The system prepares samples for transmission electron microscopy (TEM) directly from a full semiconductor wafer, removing the need to break the wafer into pieces before sample preparation.

As chip designs become smaller and more complex, manufacturers need precise measurements earlier in development. Conventional preparation can involve breaking up the wafer, tracking samples by hand and thinning them manually. These steps take time, can damage or waste material, and can produce results that vary by operator, according to Thermo Fisher.

Optis automates wafer and sample-grid handling and uses AI to determine when to stop thinning the lamella, the thin section prepared for TEM imaging. Thermo Fisher says the system has produced sections as thin as 20 nanometres for logic devices and 15 nanometres for memory devices in high-volume applications with limited variation in sample types.

The instrument is part of Thermo Fisher’s Vulcan Automated Lab. The connected workflow links each wafer’s ID and the location from which a sample was taken to its grid and TEM results, so teams can trace a measurement back to the original wafer.

Read more: Thermo Fisher launches two microscopes

Share This Article
Leave a Comment

Subscribe to our Newsletter

© 2026 Setform Limited.