subscribe
 

Universal milling glovebox for multiple mill systems

21st March 2014


Universal Multiple Mill Glovebox, showing L-shape window in open and closed positions
Drum port and Comil
Interchangeable mill system mounted on skid at the back of Glovebox

Powder Systems Ltd’s (PSL’s) universal Milling Isolator is the optimum solution when multiple mills, micronisers or air jet mills are required for a single product or process. PSL’s Milling Isolator fulfils laboratory to complete facility requirements for manufacturing formulation of fine particle sizes.

PSL provide full operator protection through high containment to nanograms level and a controlled safe environment while performing size reduction of active ingredients. Due to the explosive nature of milling and micronizing, an assured explosion protection system is fully integrated into the design, with PSL’s nitrogen purge systems able to achieve less than 1% RH.

The Universal Multiple Mill Glovebox offers the advantage of a nitrogen-purged environment, nanogram containment, a small area to clean and better control over cross-contamination. Multiple drum size can be integrated using the drum list hoist system and pneumatic sealed docking.

The Glovebox features a ‘L’ shaped window with good access for changing, stripping and cleaning mills within the glovebox. Where traditional gloveboxes would have upper and lower windows with a seam obscuring a critical point, PSL’s Milling Isolator features a lift-up window for enhanced viewing and ergonomics.

Multiple types of mill can be integrated such as comil, pin mill, jet mill, using the same glovebox. The mills are fitted onto a skid and replace from the back of the isolator.

PSL solutions for milling and micronizing include:

* Multiple types of integrated feeder;
* Mill and micronizer control including pressure balancing;
* Product collection;
* Clean-in-place (CIP) system;
* Fully PLC controlled via the HMI;
* Variety of container size inputs and outputs;
* Dust collectors;
* Inert milling for product and operator protection;
* Particle analysis;
* PSL qualified UL panel builder;
* External drive systems eliminating cross contamination of motors.

For more information, visit www.powdersystems.com





Subscribe

Subscribe



Newsbrief

Twitter Icon © Setform Limited
subscribe